New: Fast Snap Pro is now on Google Play and the App StoreGet the Android app →iPhone app →

General Contracting

Deck Repair Cost: Boards, Railings, Stairs & Joists (2026)

Planning a deck repair job? Get your own price range free.

Snap 1–3 photos and get a price range for your job in about 30 seconds, then get matched with a local pro if you want a real quote. No signup. →

Deck repair typically costs $500 to $3,500 in 2026, with an average around $1,500. Replacing a few deck boards might cost $300 to $800, while structural repairs — joists, beams, ledger boards or footings — can run $1,500 to $6,000+. If more than half the structure is compromised, replacement is often the better value.

Deck Repair Costs by Type

RepairTypical cost
Replace deck boards$8–$20 per sq ft
Railing repair or section replacement$25–$80 per linear ft
Stair repair or rebuild$300–$2,500
Joist repair or sistering$100–$300 per joist
Beam replacement$500–$2,500
Ledger board repair/replacement$1,000–$4,000+
Footing or post repair$300–$1,000 per post
Deck inspection$150–$400

Wood vs. Composite Repairs

Replacing pressure-treated boards is cheaper than composite, but composite boards cost more and can be hard to match if discontinued. Older decks may need all boards replaced on one section to keep a uniform look.

What Drives the Price

  • Hidden rot. Joists and ledgers often look fine from above but are rotted at fasteners and connections.
  • Code updates. Repairs may require bringing railings, stairs or ledger connections up to current code.
  • Height. Second-story decks need more safety equipment and labor.
  • Access. Low-clearance decks are harder to repair from below.
  • Permits. Structural repairs commonly require permits.

Repair or Replace?

SituationUsually best option
A few boards or rails damagedRepair
Surface worn but structure solidResurface (new boards on existing frame)
Widespread joist/ledger rotReplace
Deck over 20–25 years old with multiple issuesReplace

See our deck building cost guide, deck staining cost and how to bid a deck job.

Line Items on a Deck Repair Estimate

  • Demolition and disposal
  • Lumber or composite boards by sq ft
  • Joists, beams, posts (as needed)
  • Hardware: joist hangers, ledger fasteners, flashing
  • Railings and balusters
  • Stairs and stringers
  • Permit and inspection
  • Finish (stain or seal)

Quoting Tips for Deck Builders

Ask for photos from above and below the deck, close-ups of the ledger connection, stairs and posts. That catches most structural concerns before the visit, and you can include an allowance line for hidden rot. Fast Snap Pro drafts the estimate from those photos using your own pricing.

Frequently Asked Questions

How much does it cost to replace deck boards?

Typically $8 to $20 per square foot for pressure-treated or composite boards, including labor.

Is it worth repairing an old deck?

If the structure is solid, yes. If joists, beams or the ledger are rotted, replacement often makes more sense.

Do deck repairs require a permit?

Board replacement usually doesn't. Structural repairs to joists, beams, ledgers or footings often do.

How long does deck repair take?

Small repairs take a day; structural repairs can take several days.

Estimate this job faster

Deck builders: quote repairs from customer photos — above, below and at the ledger — using your own rates. Start a free Fast Snap Pro trial. Start your free trial.

Get a free price range for your deck repair job

Upload photos of your project. You'll see a price range with labor and materials broken out, and you can ask to be matched with up to 3 local pros.

Photos of the job (up to 3)

No signup. Photos are sent to the AI only for this estimate and aren't saved.

Are you a contractor?

Send a link, get photos back with a priced estimate — using your own rates, not a generic price book.

Try Fast Snap Pro free