New: Fast Snap Pro is now on Google Play and the App StoreGet the Android app →iPhone app →

HVAC

Ductwork Replacement Cost Per Linear Foot (2026)

Planning a ductwork replacement job? Get your own price range free.

Snap 1–3 photos and get a price range for your job in about 30 seconds, then get matched with a local pro if you want a real quote. No signup. →

Replacing ductwork typically costs $35 to $65 per linear foot, or about $3,000 to $12,000 for a whole home in 2026. Most homeowners with a 1,500 to 2,500 square foot house pay $5,000 to $9,000. Accessible attics and basements are cheaper; ducts inside finished walls and ceilings cost more because of the demolition and repair involved.

Ductwork Cost by Home Size

Home sizeTypical full replacement cost
Under 1,000 sq ft$2,500–$5,000
1,000–1,500 sq ft$3,500–$7,000
1,500–2,500 sq ft$5,000–$9,000
2,500–3,500 sq ft$7,000–$12,000+

Cost by Duct Type

Duct materialCost per linear footNotes
Flexible duct$10–$35Cheapest; for short runs
Sheet metal (galvanized)$20–$65Most durable, common trunk lines
Fiberglass duct board$15–$45Quieter, insulated
Spiral duct$30–$70+Exposed/modern applications

What Drives the Price

  • Access. Attic and unfinished basement runs are fastest. Crawl spaces and finished ceilings add labor.
  • Scope. Replacing a few runs is very different from a full trunk-and-branch redesign.
  • Insulation and sealing. Ducts in unconditioned spaces should be insulated and sealed (mastic or foil tape).
  • Design. A Manual D duct design ensures proper sizing, especially when replacing equipment.
  • Asbestos. Old duct wrap or tape in pre-1980s homes may require testing and abatement.
  • Registers and returns. Adding or relocating vents costs $150 to $500+ each.

Signs Ductwork Needs Replacement

  • Rooms that never heat or cool evenly
  • Visible gaps, crushed flex duct, or disconnected runs
  • Excessive dust or high energy bills
  • Ducts older than 20 to 25 years
  • Mold or pest damage

Repair, Seal or Replace?

Sometimes sealing leaky joints ($300 to $2,000 for a home) or replacing a few damaged runs is enough. Duct cleaning addresses dust but not leaks — see duct cleaning cost.

Line Items on a Ductwork Estimate

  • Removal and disposal of old ducts
  • Trunk lines and branch runs (per foot by type)
  • Fittings, boots, registers and grilles
  • Sealing and insulation
  • Labor hours
  • Permit (if required)
  • Drywall repair (if needed)

Quoting Tips for HVAC Contractors

Ask for photos of the attic or basement runs, the air handler, and registers in problem rooms. Combined with home square footage, that's usually enough to give a ballpark range before a full measure. Fast Snap Pro drafts an itemized estimate from those photos using your own per-foot rates.

Frequently Asked Questions

How much does it cost to replace ductwork in a 2,000 sq ft house?

Typically $5,000 to $9,000, depending on access and duct materials.

How long does ductwork last?

Generally 20 to 25 years, though flex duct and poorly installed systems may fail sooner.

Should I replace ductwork when replacing my HVAC system?

If the ducts are old, leaky or undersized for the new equipment, yes — new equipment can't perform well on bad ducts.

Can ductwork be replaced without removing drywall?

Often, if runs are accessible from an attic, basement or crawl space. Ducts in finished walls may require opening walls.

Estimate this job faster

HVAC contractors: turn attic and basement photos into itemized ductwork quotes using your own per-foot pricing. Try Fast Snap Pro free for 7 days. Start your free trial.

Get a free price range for your ductwork replacement job

Upload photos of your project. You'll see a price range with labor and materials broken out, and you can ask to be matched with up to 3 local pros.

Photos of the job (up to 3)

No signup. Photos are sent to the AI only for this estimate and aren't saved.

Are you a contractor?

Send a link, get photos back with a priced estimate — using your own rates, not a generic price book.

Try Fast Snap Pro free