Roofing & Exteriors
Gutter Repair Cost (2026): Leaks, Sagging, Sections and Downspouts
Updated
Gutter repair is priced by the type of failure and the linear footage affected. Small fixes — resealing a seam, replacing a hanger, clearing a downspout — are minimum-charge visits. Re-pitching a run or replacing damaged sections approaches the cost of new gutter for that stretch.
What does gutter repair typically cost?
Expect $150 to $350 for a minimum service call covering minor sealing, refastening, and downspout clearing. Re-pitching or rehanging a run is $5 to $12 per linear foot. Replacing a damaged section is $8 to $18 per linear foot installed. Downspout replacement runs $60 to $150 each.
Which repairs are worth doing vs. replacing?
- Isolated seam leaks and loose hangers on otherwise sound gutter: repair
- Widespread sagging, rust-through, or gutters pulling from fascia: quote replacement
- Sectional aluminum gutter with several bad joints: replacement with seamless usually wins on cost per year
- Fascia or soffit rot behind the gutter: that is a carpentry line item before any gutter work
How do you handle the fascia question in the estimate?
If water has been overflowing behind the gutter, assume some fascia damage and note it. Quote gutter work assuming sound fascia, with a unit price per linear foot for fascia board replacement if rot is found once the gutter is down.
What should be in the quote?
Linear footage being repaired, the specific work per section, whether gutter guards are being removed and reinstalled, and a clear statement of what is repair versus what you recommend replacing. Customers approve gutter repairs fast when they can see it is a targeted fix, not an open-ended one.
Example: repair visit on a two-story home
| Line item | How it's priced | Example |
|---|---|---|
| Reseal 3 leaking seams | Per seam or minimum | $120 |
| Re-pitch and rehang 30 ft run | Per linear ft | $270 |
| Replace 10 ft dented section | Per linear ft | $150 |
| Two-story access surcharge | Flat | $75 |
| Total | $615 |
Illustrative numbers only. Use your own rates, production times and local costs.
Show the customer what you found
Gutter problems are hard for homeowners to see from the ground. Take photos of every issue: the leaking seam, the sagging run, the gap behind the gutter. Put them on the quote next to each line. Customers approve repairs faster when they can see the problem, and photos protect you if they later ask why the work was needed.
Frequently asked questions
How much does gutter repair cost?
Minor repairs are often priced as a minimum service call of about $150 to $350. Re-pitching runs or replacing sections are priced per linear foot.
Is it worth repairing old gutters?
Isolated problems on sound gutters are worth repairing. Widespread rust, sagging or many leaking joints usually make replacement the better value. See gutter installation cost per linear foot.
Why are my gutters overflowing?
Common causes are clogs, incorrect pitch, undersized gutters or downspouts, or too few downspouts for the roof area.
See what an AI-scoped estimate looks like
Send a link, get photos back with a priced estimate — using your own rates, not a generic price book.
Try Fast Snap Pro free