Paving & Concrete
Gravel Driveway Cost Per Square Foot and Per Ton (2026)
Planning a gravel driveway job? Get your own price range free.
Snap 1–3 photos and get a price range for your job in about 30 seconds, then get matched with a local pro if you want a real quote. No signup. →
A new gravel driveway typically costs $1.50 to $5 per square foot installed in 2026, or about $1,500 to $6,000 for a standard residential driveway. Long rural driveways cost more in total but often less per square foot. Gravel itself usually runs $15 to $75 per ton before delivery, depending on type and region.
Gravel Driveway Cost by Size
| Driveway size | Approx. sq ft | Typical installed cost |
|---|---|---|
| Single-car (10x24) | 240 | $500–$1,200 |
| Two-car (20x24) | 480 | $1,000–$2,500 |
| Long residential (12x100) | 1,200 | $2,000–$6,000 |
| Rural (12x500+) | 6,000+ | $8,000–$25,000+ |
Cost by Gravel Type
| Gravel type | Typical price per ton (material only) | Use |
|---|---|---|
| Crushed stone (#57) | $20–$50 | Base and top layers |
| Crusher run / dense grade | $15–$40 | Compacts well, base layer |
| Pea gravel | $30–$60 | Decorative, shifts easily |
| Marble chips | $50–$100+ | Decorative top |
| Recycled concrete/asphalt | $10–$30 | Budget base |
What Drives the Price
- Excavation and grading. Removing topsoil and shaping for drainage.
- Geotextile fabric. Helps prevent gravel sinking into soil.
- Layering. A durable driveway typically uses a larger-stone base, a middle layer and a finer top layer.
- Depth. 4 to 12 inches total depending on soil and traffic.
- Delivery distance and truck access.
- Culverts and drainage at the road.
- Edging to keep gravel in place.
How Much Gravel Do You Need?
Multiply length x width x depth (in feet) to get cubic feet, divide by 27 for cubic yards. One cubic yard of gravel weighs roughly 1.4 to 1.5 tons. Try our concrete calculator for volume math — the cubic yard formula is the same.
Maintenance Costs
- Regrading: $100 to $500 every year or two
- Adding new top gravel: often every 2 to 4 years
- Weed control and snow plowing considerations
Gravel vs. Asphalt vs. Concrete
Gravel is the cheapest upfront but needs ongoing maintenance. See asphalt paving cost, concrete driveway cost and paver driveway cost.
Line Items on a Gravel Driveway Estimate
- Excavation and grading
- Geotextile fabric
- Base gravel (tons)
- Top gravel (tons)
- Delivery
- Compaction
- Edging or culvert (if needed)
Quoting Tips
Customers can share photos of the existing surface, the road connection and any drainage problems, plus the driveway length. Fast Snap Pro drafts a gravel driveway estimate from those details with your per-ton and per-hour rates.
Frequently Asked Questions
How much does a gravel driveway cost?
Usually $1.50 to $5 per square foot installed, or $1,500 to $6,000 for a typical residential driveway.
How deep should a gravel driveway be?
Typically 4 to 12 inches total, in layers, depending on soil and vehicle loads.
How much is a ton of gravel?
Usually $15 to $75 per ton before delivery, depending on type and location.
How long does a gravel driveway last?
With regular regrading and top-ups, a gravel driveway can last decades.
Estimate this job faster
Paving and excavation pros: turn driveway photos into gravel, asphalt or concrete quotes from your own rates. Start a free Fast Snap Pro trial. Start your free trial.
Get a free price range for your gravel driveway job
Upload photos of your project. You'll see a price range with labor and materials broken out, and you can ask to be matched with up to 3 local pros.
Photos of the job (up to 3)
No signup. Photos are sent to the AI only for this estimate and aren't saved.
Are you a contractor?
Send a link, get photos back with a priced estimate — using your own rates, not a generic price book.
Try Fast Snap Pro free