Paving & Concrete
Paver Driveway Cost Per Square Foot (2026)
Planning a paver driveway job? Get your own price range free.
Snap 1–3 photos and get a price range for your job in about 30 seconds, then get matched with a local pro if you want a real quote. No signup. →
A paver driveway typically costs $15 to $35 per square foot installed in 2026, or about $9,000 to $25,000 for a standard two-car driveway of roughly 600 square feet. Concrete pavers are the most affordable; brick, natural stone and permeable pavers cost more. Proper base preparation is the most important — and often most underestimated — part of the price.
Paver Driveway Cost by Material
| Paver type | Installed cost per sq ft |
|---|---|
| Concrete pavers | $15–$25 |
| Brick pavers | $18–$30 |
| Permeable pavers | $20–$35 |
| Natural stone (cobblestone, flagstone) | $25–$50+ |
Cost by Driveway Size
| Size | Approx. sq ft | Typical range (concrete pavers) |
|---|---|---|
| Single-car | 250–400 | $4,000–$10,000 |
| Two-car | 400–700 | $7,000–$17,000 |
| Large/circular | 800–1,200+ | $13,000–$30,000+ |
What Drives the Price
- Base preparation. Excavation, geotextile fabric, and 8 to 12 inches of compacted aggregate base for vehicle loads.
- Removal of existing driveway. Tearing out concrete or asphalt adds $2 to $6 per square foot.
- Pattern and borders. Herringbone patterns (best for driveways) and decorative borders take more cutting.
- Slope and drainage.
- Permeable systems need a deeper open-graded base but may help meet stormwater rules.
- Permits. Some towns require driveway permits or limit impervious surface.
Paver vs. Concrete vs. Asphalt
| Pavers | Concrete | Asphalt | |
|---|---|---|---|
| Cost per sq ft | $15–$35 | $6–$15 | $4–$10 |
| Lifespan | 30–50 years | 25–40 years | 15–25 years |
| Repairs | Replace individual pavers | Patch or replace slabs | Patch, sealcoat |
| Look | Highest curb appeal | Clean, modern | Basic |
See concrete driveway cost and asphalt paving cost.
Line Items on a Paver Driveway Estimate
- Demolition and haul-off
- Excavation
- Geotextile fabric
- Aggregate base (by ton/yard), compaction
- Bedding sand
- Pavers (with waste factor)
- Edge restraint
- Joint sand (polymeric)
- Sealing (optional)
- Permit
Quoting Tips for Hardscapers
Measure accurately and include a cut-waste factor (typically 5 to 10 percent, more for complex patterns). See material waste factor in estimates. Photos of the existing driveway, slope, and street apron let you scope removal and base depth quickly. Fast Snap Pro drafts the estimate from those photos with your own rates.
Frequently Asked Questions
How much does a paver driveway cost?
Typically $15 to $35 per square foot installed, or $9,000 to $25,000 for a two-car driveway.
Are paver driveways worth it?
They cost more upfront but last decades, are easy to repair, and add curb appeal.
How long does a paver driveway last?
Often 30 to 50 years with proper base installation and maintenance.
Do paver driveways need sealing?
Not required, but sealing every few years can protect color and stabilize joint sand.
Estimate this job faster
Hardscape contractors: get paver driveway estimates drafted from customer photos and your own per-square-foot pricing. Try Fast Snap Pro free. Start your free trial.
Get a free price range for your paver driveway job
Upload photos of your project. You'll see a price range with labor and materials broken out, and you can ask to be matched with up to 3 local pros.
Photos of the job (up to 3)
No signup. Photos are sent to the AI only for this estimate and aren't saved.
Are you a contractor?
Send a link, get photos back with a priced estimate — using your own rates, not a generic price book.
Try Fast Snap Pro free