Soffit and Fascia Replacement Cost (2026)

Soffit and fascia replacement costs $6 to $25 per linear foot installed in 2026, which is roughly $2,000 to $8,000 for an average house. Material choice, the home's height and roofline complexity, and rot behind the existing boards drive the number.

Cost breakdown

• Aluminum or vinyl soffit and fascia: $6-$14 per linear foot.
• Wood (primed pine or cedar): $10-$22 per linear foot.
• Composite / PVC trim board: $15-$25 per linear foot.
• Two-story or steep roofline: add 20-40% for staging and access.
• Rotted rafter tails or sheathing: $15-$40 per linear foot to repair, found during removal.
• Wrapping existing fascia in aluminum (no tear-off): $6-$12 per linear foot, cosmetic only.

What actually drives the price

Total linear footage of eaves and rakes is the base. Material, home height and access (ladder vs staging vs lift), roofline complexity (dormers, multiple gables, and corners slow the work), and the condition of the framing behind the boards all matter. Water damage from failed gutters or ice dams often means rotted rafter tails that aren't visible until the old fascia comes off.

Check the gutters and the rot risk first

Soffit and fascia damage is almost always a water story — overflowing or pitched-wrong gutters, ice dams, or missing drip edge. Photos of the eaves, the gutters, and any peeling paint or staining tell you whether this is a clean swap or a repair job with framing work hiding inside it.

Scoping this job from photos

Photos of each side of the house showing the eaves, a close-up of the fascia and soffit condition, the gutters, and any staining or peeling usually tell you the material, the access needed and whether rot is likely. Add the linear footage from the customer or a satellite view, and you can send a realistic range before the site visit. Framing rot is still confirmed at removal. See also the roof replacement cost per square foot and roof leak repair cost.

Example: soffit and fascia on a one-story ranch

A one-story home with 180 linear feet of eaves and rakes, with aluminum soffit and fascia replacing old painted wood. About 20 feet of rafter tails show rot once the old fascia is removed.

Line item	How it's priced	Example
Remove and dispose of old soffit and fascia	Per linear foot	$360
New aluminum soffit (180 lf)	Per linear foot	$1,440
New aluminum fascia wrap (180 lf)	Per linear foot	$990
Rafter tail repair (20 lf, found at removal)	Per linear foot	$560
Vents, J-channel and trim pieces	Materials + markup	$220
Total		$3,570

Illustrative numbers only. Use your own rates, production times and local costs.

Because rot repair is only confirmed on removal, many contractors list it as an allowance or a per-foot unit price on the original quote. That way the customer approves the rate in advance and the change order is simple.

Ventilation matters

Soffits are often the intake half of the attic ventilation system. When replacing them:

• Use vented soffit panels where intake ventilation is needed.
• Check that attic insulation isn't blocking the soffit vents, and add baffles if it is.
• Coordinate with ridge or roof vents so the system is balanced.

Poor ventilation can lead to moisture problems and ice dams, which is often what damaged the original fascia in the first place.

Measuring linear footage

Measure every eave (horizontal roof edge) and rake (sloped gable edge) separately, since soffit usually runs only along eaves while fascia runs along both. Note soffit depth too: a 24-inch overhang uses twice the soffit material of a 12-inch overhang for the same length.

Frequently asked questions

How much does soffit and fascia replacement cost in 2026?

$6 to $25 per linear foot, or $2,000 to $8,000 for a typical house, depending on material and access.

Should soffit and fascia be replaced with the roof or gutters?

Ideally yes — the crew is already up there and the drip edge, gutters, and fascia all tie together, so bundling avoids a second mobilization.

What's hiding behind old fascia?

Often rotted rafter tails or roof sheathing edges from years of gutter overflow — repair runs $15 to $40 per linear foot and is usually found only after removal.

Can this be quoted from photos?

A range can, from photos of the eaves, roofline, gutters, and any visible damage, plus the linear footage; framing rot is confirmed at removal.

Can you replace soffit without replacing fascia?

Yes, if the fascia is sound. Many contractors still recommend doing both together, since the fascia often has hidden water damage and the labor overlaps.

Give faster ballpark numbers

Try Fast Snap Pro to turn customer photos into a starting price range built on your own rates, before you schedule the in-person walkthrough.