New: Fast Snap Pro is now on Google Play and the App StoreGet the Android app →iPhone app →

Electricians

Subpanel Installation Cost (60, 100 & 125 Amp) in 2026

Planning a subpanel installation job? Get your own price range free.

Snap 1–3 photos and get a price range for your job in about 30 seconds, then get matched with a local pro if you want a real quote. No signup. →

A subpanel installation typically costs $500 to $2,500 in 2026, with most homeowners paying around $1,000 to $1,800 for a 100-amp subpanel installed in a garage, basement or addition. The biggest price drivers are amperage, the distance from the main panel (which sets the feeder wire cost), whether the main panel has capacity, and permit and inspection fees.

Subpanel Cost by Amperage

Subpanel sizeTypical installed costCommon uses
60 amp$500–$1,200Detached shed, small workshop, hot tub
100 amp$800–$1,800Garage, basement finish, ADU, EV charger plus shop
125 amp$1,000–$2,200Large addition, multiple big loads
200 amp (sub-fed)$1,500–$3,000+Large outbuildings, second structure

What Drives the Price

Distance and feeder wire

Feeder cable is priced per foot and gets expensive fast at higher amperages. A subpanel 10 feet from the main panel is far cheaper than one 100 feet away in a detached garage, which may also need trenching.

Main panel capacity

If the main panel is full or undersized, an electrician may recommend tandem breakers (where allowed) or a full panel upgrade first. That can add $1,500 to $4,000.

Detached buildings

Running power to a detached garage or shop means underground conduit or direct-burial cable, trenching at code-required depth, a grounding electrode system at the outbuilding, and often more labor.

Permits and inspection

Most jurisdictions require an electrical permit for a subpanel — commonly $50 to $300 — plus an inspection.

Labor

Electricians typically spend 4 to 10 hours on a subpanel job. See our electrician hourly rate guide for regional rates.

Typical Line Items on a Subpanel Estimate

  • Subpanel enclosure and main lug or main breaker
  • Feeder breaker in the main panel
  • Feeder wire (copper or aluminum) per foot
  • Conduit, fittings, connectors
  • Ground rods or grounding conductor (detached buildings)
  • Branch circuit breakers
  • Labor hours
  • Permit and inspection fee
  • Trenching (if detached)

Subpanel vs. Panel Upgrade

A subpanel adds circuit space but not service capacity. If your home's total load is too high for its service (for example, adding an EV charger, heat pump and hot tub to a 100-amp service), a load calculation may show you need a service upgrade instead.

How Electricians Can Quote Subpanels Faster

Subpanel jobs vary mostly by distance, main panel condition and access — all things a customer can show in a few photos: the main panel with the cover on, the proposed subpanel location, and the path between them. With Fast Snap Pro, customers upload those photos through a link and you get a draft itemized estimate based on your own rates to review before sending.

Frequently Asked Questions

How much does a 100-amp subpanel cost to install?

Most 100-amp subpanel installs cost $800 to $1,800, depending on feeder length, main panel capacity and permit fees.

Do I need a permit for a subpanel?

In most areas, yes. Electrical permits for subpanels are typically required and include an inspection.

Can a subpanel be added to a 100-amp service?

Often, yes — a subpanel redistributes existing capacity. Whether it's safe depends on a load calculation by a licensed electrician.

How long does a subpanel installation take?

Usually 4 to 10 hours for an attached space; detached buildings with trenching can take longer.

Estimate this job faster

Electricians: let customers send photos of their panel and the install location, and get an itemized subpanel quote drafted from your own rates. Try Fast Snap Pro free for 7 days. Start your free trial.

Get a free price range for your subpanel installation job

Upload photos of your project. You'll see a price range with labor and materials broken out, and you can ask to be matched with up to 3 local pros.

Photos of the job (up to 3)

No signup. Photos are sent to the AI only for this estimate and aren't saved.

Are you a contractor?

Send a link, get photos back with a priced estimate — using your own rates, not a generic price book.

Try Fast Snap Pro free